In this guide, we will create a simple and precise digital clock using the Raspberry Pi Pico RTC DS3231 Module through the Arduino IDE. We will use a 16x2 I²C LCD screen to display the information.

Here’s something fun from [Chad Kapper] over on HackMakeMod: Escape Room Lockbox with the Cheap Yellow Display. You may have heard of the “cheap yellow display” (CYD), so-called due to the board’s ...

This repo can be used to setup RTC clock (DS3231). The sketch includes a simple AT based serial communication protocol that can be used to set the time. The solution can be embedded into existing ...

Abstract: In this paper, Arduino based Smart Irrigation System using GSM Module and Sun Tracking Solar system has been explored. This system is hoped to be very convenient and affordable for the ...

H1L: FLT - Filter select : Normal latency (Low) / Low latency (High) H2L: DEMP - De-emphasis control for 44.1kHz sampling rate: Off (Low) / On (High) H3L: XSMT - Soft mute control: Soft mute (Low) / ...

Abstract: To address the passability issues of a corner module architecture intelligent electric vehicle (CAV) on deep-potholed roads during emergency rescue operations, the motion posture control of ...